Thursday, March 28, 2013

D-Link DWL-3500AP - High-Speed 2.4GHz Wireless Access Point Driver/Firmware


VersionDescriptionDateFile
2.20H/W: A1, A2, A3

Changes in this version:
1. [NEW] Keep Management Parameters after Factory Reset: The APs support a CLI factory-reset keepmanagement command for the APs preserved certain configured parameters after the factory-defaults reset
2. [NEW] AP Hidden Page support: The AP Web UI supports a hidden page that can be accessed from the URL http:///version.txt. This page displays some AP information including the AP firmware version and MAC address
3. [NEW] Default SSID values: The default values of the 16 SSIDs for each radio are dlink1-dlink16 (DWL-8600AP) and dlink1-dlink8 (DWL-x500AP)
4. [FIX] The DWL-x500APs do not support the "space" as encryption key within the WPA/WPA2 encryption key, but space is included in ASCII support
5. [FIX] When Syslog is set to display messages of Debug level and higher on DWL-3500AP, the error messages such as the following appear: map_proc.c:504:map_proc_collect_client_ association_stats - Error in opening -- /proc/net/ieee80211/wlan1/sta/ 00:11:22:33:44:55

For full details, please refer to release notes.
05/31/2011
2.1.0.9- For Hardware A2
- Support station isolation under
- Standalone/Managed Mode
- Enhance client association trap & syslog
- Reveal 'factory reset' command in Managed Mode and provide hardware reset button functionality
06/17/2008
2.1.0.10Latest Update11/13/2008

No comments :

Post a Comment